Your location:首页 > Product center > Cryogenic attachment
Product category:
-
Cryogenic conductor
Low temperature wire includes: low temperature phosphorus copper wire, low temperature manganese copper wire and low temperature copper wire
View details -
Cryogenic coaxial cable
Coaxial cable for use at low temperatures，In addition to the electrical properties of the cable，Also consider the low temperature resistance of the cable, vacuum compatibility, heat leakage, flexibility, space limitations, etc，Teflon materials maintain good flexibility and vacuum compatibility at low temperatures，Therefore, the insulation material using Teflon's very thin coaxial cable is widely used for precision DC or low frequency measurements at low temperatures
View details -
Low temperature triple coaxial cable
T-type triaxial cable is a type with an outer diameter of 1.6mm Extremely thin triaxial cable that can be used at low temperatures and is commonly used for cryogenic systems where precision DC testing is required Primary cable。
View details -
Semi-rigid cable
Semi-rigid cable includes: SS-1.26-20-LP stainless steel semi-rigid cable (20Ghz), CN-0.86-20-LP copper-nickel semi-rigid cable (20Ghz), NT-2.2-20-LP Niobium-titanium semi-rigid cable (20Ghz), SS-1.26-40-LP stainless steel semi-rigid cable (40Ghz), CN-0.86-40-LP copper-nickel semi-rigid cable (40Ghz), NT-2.2-40-LP Niobium-Titanium semi-rigid cable (40Ghz)
View details -
Low temperature varnish
The electrical conductivity and bonding properties of VGE-7031 insulating varnish adhesive, combined with its chemical properties and good saturation properties, make it an excellent low-temperature material。As an adhesive, the VGE-7031 can bond a variety of materials with short cycle times and can be air-dried or baked。Laminating is excellent for many materials and can be baked immediately after application to bonded parts, or baked and air dried after parts are assembled or stored for a few hours, days or 7 weeks。It is also an insulating adhesive at low temperatures and is commonly used as a adhesive for sensors。
View details -
Low temperature grease
Grease is usually used to install and secure sensors，Provide thermal contact while ensuring electrical insulation，Both N and H Grease are used to enhance thermal contact，Especially if the sensor is mounted inside the cavity，N Grease is suitable for use at low temperatures，H Grease is suitable for high temperature applications。
View details -
Epoxy resin
The epoxy resin consists of two types: low temperature conductive adhesive and Stycast®2850FT epoxy resin。Epoxy resins are used to mount and secure the sensors while providing thermal contact and electrical insulation with the sample。Epoxy resins can also be used for adhesive fixation of mechanical accessories and mechanical connection points。Stycast®2850FT is a black epoxy resin with a thermal expansion coefficient that matches copper。The low temperature conductive epoxy resin filled with silver has excellent strength, electrical conductivity and thermal conductivity。
View details
- Page 1 / Total 1 page
